ACB120 | GAC Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

10 Turn / 20KΩ / With Locking Shaft

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

5-Star Torx Bit - Pump Cover Screws (Service Tool)

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

12VDC / Standard Unit / Flying Leads

12VDC / Standard Unit

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

10 Turn / 20KΩ / With Knob

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

10VDC (From Speed Control) / Fixed Speed

12VDC / Terminal Strip

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

12VDC / Standard Unit

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

10 Turn / 5KΩ / With Locking Shaft

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

24VDC / Packard Connector without Mating Connector / Includes GA102

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

1 Turn / 5KΩ / With Knob

10VDC (From Speed Control) / Variable Speed - Off-Road

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

M5 I.D. End and Thread 14mm Deep

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)