BR300 | GAC M5 I.D. End and Thread 14mm Deep

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

24VDC / Standard Unit

MSP / Engine Speed Simulator, Alligator Clips, General Usage

EDG6000 - Programming Interface Assembly with Serial Port

Multi-VDC / Standard Unit

24VDC / Packard Connector without Mating Connector

Multi-VDC / Standard Unit

180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

24VDC / Packard Connector without Mating Connector

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

24VDC / Woodward 2301A to GAC LSM/SYC

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

Multi-VDC / Switchable Soft Coupling and Lead Circuit

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

24VDC / Packard Connector without Mating Connector / Lever Included

24VDC / Standard Unit

10 Turn / 10KΩ

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

12VDC / Packard Connector without Mating Connector / Includes GA102

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

JDR Series - Mating Connector Kit / 6-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

Multi-VDC / Deutsch Connector without Mating Connector / Voltage Variable Speed Input 0-5VDC

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included