BK267 | GAC Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

24VDC / Standard Unit with Idle

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

1 Turn / 20KΩ / With Knob / Droop Control

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

MSP / Engine Speed Simulator, Alligator Clips, General Usage

180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

12VDC / Packard Connector without Mating Connector

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

5-Star Torx Bit - Pump Cover Screws (Service Tool)

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

DPG100/101-F & DFT200 Handheld Configuration Tool

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / Overspeed Switch

1 Turn / 5KΩ / With Knob

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

176 Series Installation Kit - Bosch A Pump Bearing Retainer - Plate, Gasket, and Shims

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals