KT231M | GAC ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

24VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses, 12-24V DC/DC Converter (PCI106)

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

24VDC / Volvo EMS I & II EFI Control (2.875V Nominal Input) to GAC LSM/SYC

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Woodward 2301A to GAC LSM/SYC

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

JDR Series - Mating Connector Kit / 6-Terminal

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

12VDC / Standard Unit

Multi-VDC / Standard Unit

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

24VDC / Light-Force (Low-Current Optimized PID)

10 Turn / 20KΩ / With Knob

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

12VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless