KT130 | GAC ALN Series - Clevis Kit Only

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

USB to RS232 Adapter for PC Interface, GAC Recommended

176 Series Installation Kit - Bosch A Pump Bearing Retainer - Plate, Gasket, and Shims

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

2.7 in. [69mm] Thread Length / 1 ft. [0.3m] Shielded Cable / Flying Leads / Stainless

10VDC (From Speed Control) / Variable Speed - Off-Road

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

24VDC / Standard Unit

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

Multi-VDC / Standard Unit

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

AFR Series - Mating Connector #1 Kit / 35-Terminal

Multi-VDC / Overspeed Switch

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

110 Series - Mating Connector Kit / 2-Terminal

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

M8 I.D. End and Thread

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless