KT276 | GAC 175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

12VDC / Light-Force (Low-Current Optimized PID)

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

Multi-VDC / Temperature Compensated

24VDC / Standard Unit

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

10 Turn / 5KΩ / With Knob

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

12VDC / Light-Force (Low-Current Optimized PID)

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

24VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

10VDC (From Speed Control) / Variable Speed - Off-Road

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)