ADD137BQK-R-12 | GAC 12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

12VDC / Packard Connector without Mating Connector / Includes GA102

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

10 Turn / 20KΩ / With Knob

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

120E4 Series - Mounting Bracket for Cummins 855 Engines

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

AFR Series - Mating Connector #1 Kit / 35-Terminal

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

10VDC (From Speed Control) / Fixed Speed

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

6A / 63V Field

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

Multi-VDC / MTU M-DEC to GAC LSM/SYC

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

12VDC / Standard Unit / Flying Leads

Multi-VDC / Anti-Windup Circuit (Gaseous) / Recommended for T3/T4 ATBs

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Standard Unit

12VDC / Deutsch Connector without Mating Connector / Same as ACD110A

110 Series - Mating Connector Kit / 2-Terminal

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal