ALR190-M04-12 | GAC 12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

12VDC / Packard Connector without Mating Connector / Includes GA102

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

6A / 63V Field

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Standard Unit

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

M5 I.D. End and Thread 14mm Deep

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

24VDC / Packard Connector without Mating Connector / Includes GA102

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

120E4 Series - Fuel Valve Service Replacement Kit

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

24VDC / Light-Force (Low-Current Optimized PID)

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

12VDC / Standard Unit

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

12VDC / Deutsch Connector without Mating Connector / Same as ACD110A

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Universal / 4-20mA Input / 0-5VDC Output / Reverse Polarity

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Light-Force (Low-Current Optimized PID)

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires