ADD225S-12 | GAC 12VDC / Packard Connector without Mating Connector

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

1 Turn / 20KΩ / With Knob / Droop Control

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

M6 I.D. End and Thread

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

24VDC / Terminal Strip

M8 I.D. End and Thread

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

USB to RS232 Adapter for PC Interface, GAC Recommended

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

ALN Series - Clevis Kit Only

12VDC / Deutsch Connector without Mating Connector / Same as ACD110A

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

12VDC / Packard Connector without Mating Connector

176 Series Installation Kit - Bosch A Pump Bearing Retainer - Plate, Gasket, and Shims

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

12VDC / Standard Unit / Flying Leads

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

10 Turn / 1KΩ

Multi-VDC / Automatic Synchronizer with Sync Check Relay

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized