ADD103B-12 | GAC 12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

12VDC / Packard Connector without Mating Connector

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

M8 I.D. End and Thread

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

12VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses

12VDC / Packard Connector without Mating Connector / Lever Included

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

Multi-VDC / Overspeed Switch

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

24VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

12VDC / Standard Unit / Flying Leads

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

10 Turn / 5KΩ / With Locking Shaft

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

12VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

Multi-VDC / MTU M-DEC to GAC LSM/SYC

10VDC (From Speed Control) / Variable Speed - Off-Road

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

Multi-VDC / Light-Force (Low-Current Optimized PID)

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

12VDC / Light-Force (Low-Current Optimized PID)