ADC225JS-12 | GAC 12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. 2.13m / Greater Rate Return Spring SP207

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

Multi-VDC / Standard Unit

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

24VDC / Packard Connector without Mating Connector / Lever Included

ALN Series - Clevis Kit Only

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

12VDC / Light-Force (Low-Current Optimized PID)

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

176 Series Installation Kit - Bosch A Pump Bearing Retainer - Plate, Gasket, and Shims

Multi-VDC / One Element Speed Switch - Overspeed

M5 I.D. End and Thread 14mm Deep

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

24VDC / Terminal Strip

EDG6000 Series - Mating Connector Kit / 14-Terminal

MSP / Engine Speed Simulator, Alligator Clips, General Usage