ADC225S-24 | GAC 12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. 2.13m

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

4.86 in. [123mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

24VDC / Packard Connector without Mating Connector

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / High Temperature Coil for Full Duty Cycle Operation / Not equivalent to Renault 5010438374 which has Saab Connector (Contact GAC for Renault Version)

12VDC / Packard Connector without Mating Connector / Lever Included

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

12VDC / Light-Force (Low-Current Optimized PID)

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

M6 I.D. End and Thread

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

176 Series Installation Kit - Bosch A Pump Bearing Retainer - Plate, Gasket, and Shims

24VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

Multi-VDC / MTU M-DEC to GAC LSM/SYC

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

24VDC / Packard Connector without Mating Connector / Lever Included

24VDC / Standard Unit / Flying Leads

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

Multi-VDC / Standard Unit

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC